Mazda 2: Starting a Flooded Engine (SKYACTIV-G 1.3 and SKYACTIV-G 1.5 )
Mazda2 Owners Manual
If the engine fails to start, it may be fl ooded (excessive fuel in the engine).
Follow this procedure:
- If the engine does not start within fi ve seconds on the fi rst try, wait ten seconds and try again.
- Make sure the parking brake is on.
- Depress the accelerator all the way and hold it there.
- Depress the clutch pedal (Manual transaxle) or the brake pedal (Automatic transaxle), then press the push button start. If the engine starts, release the accelerator immediately because the engine will suddenly rev up.
- If the engine fails to start, crank it without depressing the accelerator.
If the engine still does not start using the above procedure, have your vehicle inspected by an expert repairer, we recommend an Authorised Mazda Repairer.
Other info:
Nissan Micra. Air conditioner system (if so equipped)
refrigerant and oil recommendations
The air conditioner system in your NISSAN
vehicle must be charged with the refrigerant
HFC-134a (R-134a) and the oil, NISSAN
A/C system oil Type R or the exact equivalents.
CAUTION
The u ...
Peugeot 208. Leaving cruise control mode
Turn thumb wheel 1 to the "0" position: the cruise control mode is deselected.
The display returns to the distance recorder.
...
Mazda 2. Blind Spot Monitoring (BSM) System
The Blind Spot Monitoring (BSM) system is designed to assist the driver in
checking the
area to the rear of the vehicle on both sides during lane changes by alerting
the driver to the
presence o ...
Manuals For Car Models
-
Chevrolet Sonic -
Citroen C3 -
Fiat Punto -
Honda Fit -
Mazda 2 -
Nissan Micra -
Peugeot 208 -
Renault Clio -
Seat Ibiza -
Skoda Fabia
