WARNING
|
The power steering system is designed to provide power assist while driving to operate the steering wheel with light force.
When the steering wheel is operated repeatedly or continuously while parking or driving at a very low speed, the power assist for the steering wheel will be reduced. This is to prevent overheating of the power steering system and protect it from getting damaged. While the power assist is reduced, steering wheel operation will become heavy. When the temperature of the power steering system goes down, the power assist level will return to normal. Avoid repeating such steering wheel operations that could cause the power steering system to overheat.
You may hear a sound when the steering wheel is operated quickly. However, this is not a malfunction.
If the electric power steering warning light PS illuminates while the engine is running, it may indicate the power steering system is not functioning properly and may need servicing. Have the power steering system checked by a NISSAN dealer.
When the electric power steering warning light illuminates with the engine running, there will be no power assist for the steering but you will still have control of the vehicle. At this time, greater steering effort is required to operate the steering wheel, especially in sharp turns and at low speeds.
For additional information, refer to “Power steering warning light” in the “Instruments and controls” section of this manual.
Mazda 2. Towing
Towing Caravans and Trailers
(Europe/Russia/Turkey/Israel/South Africa)
Your Mazda was designed and built primarily to carry passengers and cargo.
If you tow a trailer, follow these instructions ...
Chevrolet Sonic. Turning the Systems Off and On
The button for TCS and StabiliTrak is on the center console.
Caution
Do not repeatedly brake or accelerate heavily when TCS is off. The vehicle
driveline could be damaged.
To turn off only TCS, ...
Peugeot 208. Moving off
Select position N.
Press the brake pedal fully.
Start the engine.
N appears in the instrument panel.
N flashes in the instrument panel screen if the gear lever is not in position
N on s ...