B-Class car manuals
Peugeot 208: Operating fault - Stop & Start - Driving - Peugeot 208 Owners Manual

Peugeot 208: Operating fault

Peugeot 208 Owners Manual


In the event of a fault with the system, the "ECO OFF" switch warning lamp flashes then comes on continuously.

Have it checked by a PEUGEOT dealer or a qualified workshop.

In the event of a fault in STOP mode, the vehicle may stall. All of the warning lamps come on. It is then necessary to switch off the ignition and start the engine again using the key.

    Reactivation

    Maintenance

    Other info:

    Citroen C3. Fuel consumption
    (a) .../1: fi tted with low rolling resistance tyres to reduce consumption and emissions of CO2. The fuel consumption fi gures shown here correspond to the values communicated at the time of p ...

    Chevrolet Sonic. Jump Starting
    For more information about the vehicle battery, see Battery. If the battery has run down, try to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps ...

    Skoda Fabia. First aid kit and warning triangle
    Fig. 138 Placing of the warning triangle A warning triangle with the maximum dimensions 39 x 68 x 450 mm can be attached to the trim panel of the rear wall with rubber straps » Fig. 138. WARNI ...

    Manuals For Car Models


    © 2016-2024 Copyright www.b-auto.net 0.0074