Front interior light
Fig. 62 Interior roof trim: front interior lights
The switch ⇒ fig. 62 is used to select the following positions:
Courtesy light position
Sliding switch in central position The interior lights are automatically switched on when the vehicle is unlocked or the key removed from the ignition lock and turn off about 20 seconds after the closure of the doors. The interior lights are switched off when the vehicle is locked or when the ignition is switched on.
Interior light switched on
Move the knob to the position
.
Interior light switched off O
Move the knob to the position O
Note
If not all the vehicle doors are closed, the interior lights will be switched off after approx. 10 minutes, providing the key has been removed and the courtesy light position selected. This prevents the battery discharging.
Front reading light
Fig. 63 Front reading light
Switching on the reading light
Press the corresponding button
⇒ fig. 63 to switch on the reading light.
Switching off the reading lights
Press the corresponding button to switch off the reading light.
Glove box light
The light in the glove box on the front passenger side will only light up if the lights are switched on and the glove box is open.
Boot light
Fig. 64 Luggage compartment light
The light is activated when the tailgate is open, even when the ignition and lights are turned off. For this reason ensure that the tailgate is always closed.
Peugeot 208. Reinitialisation of the electric windows
Following reconnection of the battery, the safety anti-pinch function must be
reinitialised. The safety anti-pinch is not active during these operations:
- lower the window completely, then raise i ...
Renault Clio. Fitting a radio
Radio location 1
Unclip the blanking cover. The aerial, +
and – supply and speaker wire connections
are located behind it.
Door speakers 2
To install any equipment, please consult
an a ...
Fiat Punto. Failure warning lights
Any failure is indicated by cluster warning light
coming on together with the message on the
reconfigurable multifunction display (where required)
(see section “Warning lights and messages”). ...